Mounts, Backs & Bags

Frames

Email Signup



Visit our facebook page

  Home > Single Aperture Mounts > Conservation Core Mounts > Imperial Sizes (inches) > Single Mounts >

18"x14" Mount (457 x 356mm)
18"x14" Mount (457 x 356mm)


 
Price before discounts £4.29

Product Code: WC18X14IN

Mount Orientation


Image Size

Print / Image size*:
Aperture Shape


Custom aperture Measurements

Custom width in mm:

Custom height in mm:
Colour Choices

Mount Colour*:

Qty:  

  
Description
 
This mount is cut from acid free 1.4mm thick mount board, and has a single bevelled aperture (window) cut out which is positioned centrally in the mount. A choice of aperture sizes and mount colours are available, please select your choices from the drop down menu's. Please note that when selecting the print/image size we assume this is the paper size and thererfore reduce the aperture by 10mm (5mm on all sides) to prevent fall through. For example if you select a 6x4in it will be cut 5.6 x 3.6in. if you select a 15x10cm it will be cut 14x9cm. If you do not wish to reduce the aperture simply select custom from the drop down menu and enter the sizes you require the aperture cut in mm. Where an aperture size selected does not give an even border (margin) all round and the orientation selected is not centred then it will be positioned so that the top and side margins are equal and the wider margin is at the bottom of the mount (weighted). Therefore be sure to select the correct orientation of the mount where available. Where portrait is selected the image/print size will  also be cut in portrait also. i.e. a 15x10cm aperture will be cut for a10x15cm portrait image. Where a landscape aperture is required in a portrait mount, select portrait as the mount orientation, then select custom for the aperture and input your required aperture size. Please note that any measurements input for the aperture size will be the size cut and will over ride any of the standard selections made.