www.framingfantastic.co.uk
Framing Services
Mount Cutting Service
Mount Board Colour Chart
Recommended Links
Gift Certificates
Site Help / FAQ
Mounts, Backs & Bags
Mount Card Blanks
Single Aperture Mounts
Backing Cards
Self Seal Polypropylene Bags
Sundries (Tape etc.)
Frames
Picture Frames
Email Signup
Home
>
Single Aperture Mounts
>
Economy Mounts > Imperial Sizes (inches)
>
Single Mounts
>
10"x8" Mount (254 x 203mm)
Alternative Views:
Price before discounts
£
1.22
Product Code:
EB10X8IN
Mount Orientation
Centred
Landscape
Portrait
Image Size
Print / Image size
*
:
Please make a Selection
10x5cm
4x2in
A7 (10.5x7.4cm)
12x7.5cm
5x3in
A6 (14.8x10.5cm)
15x10cm
6x4in
18x12cm
7x5in
20x15cm
8x6in
A5 (21x14.8cm)
22x18cm
9x7in
Custom (enter sizes Below)
Aperture Shape
Rectangular / Square
Oval / Circular
Custom aperture Measurements
Custom width in mm:
Custom height in mm:
Colour Choices
Mount Colour
*
:
Please select a colour
EB001 Ivory
EB002 Black
EB003 Cream
EB004 Snow White
EB005 Glacier White (T)
EB006 Ivory Powder
EB017 Damascus Green
EB021 Hayseed
Qty:
Description
This mount is cut from standard 1.3mm thick mount board, and has a single bevelled aperture (window) cut out which is positioned centrally in the mount. A choice of aperture sizes and mount colours are available, please select your choices from the drop down menu's. Please note that when selecting the print/image size we assume this is the paper size and thererfore reduce the aperture by 10mm (5mm on all sides) to prevent fall through. For example if you select a 6x4in it will be cut 5.6 x 3.6in. if you select a 15x10cm it will be cut 14x9cm. If you do not wish to reduce the aperture simply select custom from the drop down menu and enter the sizes you require the aperture cut in mm. Where an aperture size selected does not give an even border (margin) all round and the orientation selected is not centred then it will be positioned so that the top and side margins are equal and the wider margin is at the bottom of the mount (weighted). Therefore be sure to select the correct orientation of the mount where available. Where portrait is selected the image/print size will also be cut in portrait also. i.e. a 15x10cm aperture will be cut for a10x15cm portrait image. Where a landscape aperture is required in a portrait mount, select portrait as the mount orientation, then select custom for the aperture and input your required aperture size. Please note that any measurements input for the aperture size will be the size cut and will over ride any of the standard selections made.